What is 100 100 10 1

Angle steel 100x100 x 10 angle iron profile stainless steel matt 100 x 100 x 10 mm | 1 m / 100 cm / 1000 mm

Here we offer in selectable dimensions and a length of up to 600 cm

Stainless steel angle steel matt / raw according to DIN 1028

The isosceles angle steel with a matt, unpolished surface
is rolled, made of 1.4301 V2A with a rounded inner edge and a sharp outer edge.

The profile ends are slightly deburred.


In the upper selection box you can

  • Your desired number of pieces
  • the different dimensions
  • the profile length (tolerance: +/- 3mm)

choose.

The outside dimension of the angle is always given
EXAMPLE: Angle 20 x 20 x 3 mm = outer edge 20mm wide ~ 3 mm material thickness = inner leg 16 - 17 mm (please also note inner rounding)


APPLICATION AREA:

the possible uses are very diverse and ideally suited for e.g.

  • End strip / angle strip
  • Construction / steel construction / metal construction
  • Clinker facing / clinker bracket / support bracket / paving bracket
  • Collision protection / corner protector / edge protection
  • stable pegs / ground anchors or pegs

The angles can also be welded together without any problems.


Our long goods are graded as follows for reasons of shipping costs

  • Profile lengthup to 25 cm (L)
  • Profile lengthfrom 26 to 145 cm (XL)
  • Profile lengthfrom 146 to 250 cm (XXL)
  • Profile lengthfrom 251 to MAX stock length ( MAX )
    (varies depending on the profile from 3 to 6 mtr)

see table of shipping costs